(0086)18857722008 NEED HELP? CALL US ANY DAY, ANY TIME

BROWSE PRODUCTS

HIGH-QUALITY PROCESS CONTROL SOLUTIONS

Home > DCS > Yokogawa > Calibrator > Yokogawa CA150 Calibrator
Yokogawa CA150 Calibrator
Fill out my online form.

Receive a reply within 60 minutes,when you submit a Quick Quote Request Monday-Friday between9:00a.m. and 5:00 p.m. CST. Requests received outside of these hours will receive a reply the next business day.

  • Place of Origin: Japan
  • Brand Name: YOKOGAWA
  • Model Number: CA150
  • Product Name: Yokogawa CA150 Calibrator
  • Safety: good
  • Quality: International Standard for Yokogawa CA150 Calibrator
  • Weight: 0.73kg
  • Power supply: 220-240V

CA150 signal source and measurement operations simultaneously:
In conventional calibration applications, multiple devices, such as a standard source, and multimeter resistance box. Now, with a single CA150, both to perform routine inspection and maintenance of the thermocouple, RTD and instrumentation, but also on the process equipment, such as transmitters, temperature controller and signal converter maintenance and diagnostic equipment.
CA150 high-precision, multi-functional source and measurement:
For DC voltage ranges source unit and measurement unit has 0.02% accuracy. A DC voltage, DC current, resistance, heat resistance, thermocouple (10 kinds) and frequency measurements. In DC1V, 10V, 500 ohm (excitation current 1mA) and RTD (excitation current 1mA) range, the minimum response time source 5ms

Specifications

 

Standard Accessories

None

Power Supply

6 AA size alkaline batteries AC adapter (sold separately) AC adapter specification: 100 to 240 VAC, 50/60 Hz, 1.4 A Dedicated NiMH battery (sold separately) OUTPUT: 12 VDC, 3 A

Auto power-off

Approx. 10 minutes; it can be canceled by setting.

Operating Temperature/Humidity Range

0 to 40°C, 20 to 80 % RH (no condensation)

Storage Temperature Range

-20 to 60°C 90%RH or less (no condensation)

External Dimensions

251 x 124 x 70 mm

Weight

Approx. 1000 g

Conforming Standards Safety

Softy EN61010-1 EMC EN 61326 Class B;EN 55011 Class B Group1 EN 61000-3-2; EN 61000-3-3, EN61326

 

Product Overview

Vertical Hand-Held Calibrator

Easy-to-hold vertical body is designed to make it intuitively easy to operate, as individual functions are accessed directly by pressing assigned keys. Using the main body case (model No. 93027) (sold separately), you can hang CA150 to your body or a handrail to keep it handy.

Simultaneous Source and Measurement for Process Devices

In conventional calibration applications, multiple devices such as a standard generator, dial resistor and multi-meter were required. Now with a single CA150 unit, it is possible to perform operation check at regular inspection and maintenance of thermocouples, RTDs and instruments, as well as maintenance and equipment diagnosis of process devices such as transmitters, thermostats and signal converters.

Loop Power Supply Function

It is possible to measure generated current signals while supplying loop power 24 VDC from a two-wire type transmitter (up to 22 mADC).

Highly Accurate and Multi-Functional Source and Measurement

High accuracy: 0.02% for the source unit and 0.02% for the measurement unit Source and Measurement functions: DCV voltage, DC mA, ohm, frequency and temperature (thermocouple, RTD) and 24 VDC power supply function for transmitters

Output Functions

Automatic Output Functions

  • Step sweep function This function changes the output in a staircase (step) pattern at fixed intervals.
  • Linear sweep function This function increases (or decreases) the output linearly with respect to the generated value.
  • Program sweep function This function outputs source setting values stored by the data memory function sequentially in the order they are stored in the memory.

Communication Functions

Serial interface RS232 D-Sub 9-pin connector

Memory Function

Data can be stored and loaded in setting memory (setting data) and data memory (source/measurement).

  • Setting memory This function saves/loads setting conditions. Up to 21 data items can be stored. Settings for (source/measurement) functions, ranges, generated values/measured values as well as setting mode conditions can be stored.
  • Data memory This function saves source and measure values displayed. Up to 100 data items can be stored. Storage date/time, (source/measurement) functions, ranges and generated values/measured values can be stored. Stored data can be checked on the display of the main unit as well as via communication.

 

MENU