KEYENCE Photoelectric Sensors PX series PX-10
| Model | PX-10 | |||
| Type | Cable type | |||
| Output | NPN | |||
| Response time | 500 μs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA) | |||
| Output selection | LIGHT-ON/DARK-ON | |||
| Indicator lamp | – Operation indicator:Red LED x 2, DSC orange LED x 1 – Dual digital monitor:Dual 7-segment display [Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together, current value range:0 to 65504, excess gain:0 P to 999 P] – Hold function:Possible to display both peak and bottom hold values. Selectable from 5 variations. – Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)] – Scaling display |
|||
| Detection mode | Light intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor] | |||
| Shift function | Variable between –1999 and 9999 | |||
| Timer function | Timer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shot Timer duration selectable:1 ms to 9999 ms Maximum error against the setting value:10% max. |
|||
| Control output | NPN open-collector 40 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max. | |||
| External input | Input time 2 ms (ON)/20 ms (OFF) min. | |||
| Interference prevention | Up to 4 units (in all power modes)*1 | |||
| Rating | Power voltage | 12 to 24 VDC ripple (P-P) 10% max. Class 2*2 | ||
| Power consumption | Standard mode:50 mA max. at 24 V/55 mA max. at 12 V Power saving mode:40 mA max. at 24 V/45 mA max. at 12 V |
|||
| Environmental resistance | Enclosure rating | IEC:IP67/JEM:IP67/NEMA:4X | ||
| Operating temperature range | -10 to +55°C 14 to 131°F (No freezing)*3 | |||
| Operating ambient humidity | 35 to 85% RH (No condensation) | |||
| Vibration | 10 to 55 Hz double amplitude 1.5 mm 0.06″ 2 hours each in X, Y and Z axis | |||
| Case material | Housing:PBT, display:PSU, display cover/connector cover:SUS304, radiator plate:SUS304, gasket:NBR | |||
| Weight | Approx. 100 g (Including cable) | |||
| *1 The received light intensity may vary somewhat when the sensor head’s cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affected somewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts. *2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m 9.8′ or more (PX-H71/H71TZ) or 10 m 32.8′ or more (PX-H72). *3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below. 2 to 4 Units:-10 to +50°C 14 to 122°F, 5 to 17 Units:-10 to +45°C 14 to 133°F. |
||||
Japan Keyence keyence photoelectric sensor:
PZ-M51 PZ-M51 PZ-M61 PZ-M31 PZ-M31 PZ-M31 PZ-M31 PZ-M31 PZ-M31 PZ-M31 PZ-M31 PZ
PZ-V71 PZ-V71 PZ-V71 PZ-V71 PZ-V71 PZ-V71 PZ-V71 PZ-V71 PZ-V71 PZ-V71 PZ-V71 PZ
PZ2-51 PZ2-51P PZ2-61 PZ2-61P PZ2-41 PZ2-41P PZ2-42 PZ2-42P
PZ2-62 PZ2-62P PZ2-62SPO PZ-101 PZ-41 PZ-42 PZ-51
PZ-G41N PZ-G51P PZ-G51P PZ-G52P PZ-G52P PZ-G52P PZ-G52P PZ-G52P PZ-G52P
PZ-G61N PZ-G61P PZ-G101P PZ-G101P PZ-G101P PZ-G10P PZ-G10P
PS-55 PS-50 PS-50 PS-50 PS-50 PS-
PS-20 PS-19 PS-49 PS-
PQ-01 PQ-02 PG-602 PG-610
Japan Keyence keyence proximity sensor:
EM-030 EM-030P EM-008 EM-005 EM-054 EM-054 EM-054
EM-080 EM-080P EM-010 EM-010P EM-014 EM-014P
EZ-8M EZ-12M EZ-18M EZ-18M EZ-18M EZ-18M EZ-18M
EV-108M EV-112M EV-118M EV-118M EV-11U EV
EV-130U EV-112F EV-118F EV-130F
EH-30 EH-110 EH-110 EH-110 EH-110 EH-E
EH-4010 EH-430 EH-430 EH-430
E-290 ES-M1 ES ES-220 ES ESR