proximity sensor

Omron Proximity Sensor E2EC-M / -Q Series

Quick Details
Place of Origin:Germany
Brand Name:Omron
Model Number:E2EC-M / -Q
Usage:Humidity Sensor
Theory:Current Sensor
Output:Analog Sensor
Model:E2EC-M / -Q
Name:Omron Proximity Sensor E2EC-M / -Q
Accuracy:0.5%FS

proximity sensor

Omron Proximity Sensor E2EC-M / -Q Series

Features:
Using stainless steel detection surface, to strengthen the

reliability of the detection head

There are also splash resistant models for welding processes

species:
Ontology

Shape Detection Distance Output Type Model

Action mode NO
1865_lu_1_1 ..

Φ8 2mm DC 3-wire (PNP) E2EC-MC2B1 2M

DC 2-wire (with polarity) E2EC-MC2D1 2M

DC 2-wire (no polarity)

③-④ pin configuration E2EC-QC2D1-M1GJ-T 0.3M

Accessories (sold separately)

Sensor I / O connector at a glance (M12, unilateral

connector)

(Connector relay type required) is not a sensor attachment,

please be sure to order.

Shape wire length sensor I / O connector type Applicable

proximity sensor model

Straight
1865_lu_2_1

2m XS2F-D421-DD0 E2EC-QC2D1-M1GJ-T

5m XS2F-D421-GD0

L type
1865_lu_2_2

2m XS2F-D422-DD0
5m XS2F-D422-GD0

Note: The above sensor I / O connector for the standard

cable type.

In the splashing environment, use a flame retardant cable

type (XS2F-D42 □ – □ 80-F).

Rating / Performance:

Information Update: July 17, 2014

Type DC 3-wire PNP DC 2-wire DC 2-wire (no polarity)

(Resistant to splash type)

Size φ8 (sensor head)

Shielded shield

Model E2EC-MC2B1 E2EC-MC2D1 E2EC-QC2D1-M1GJ-T

Detection distance 2mm ± 15% 2mm ± 10%

Set the distance 0 ~ 1.2mm 0 ~ 1.4mm

Should be less than 15% of the detection distance

Can detect the object magnetic metal (non-magnetic metal

detection distance is short.

See Catalog “characteristic data”)

Standard test object iron 8 × 8 × 1mm

Response frequency 100Hz

Power supply voltage (using voltage range) DC12 ~ 24V Ripple

(p-p) 10% or less (DC10 ~ 30V)

Current consumption below 10mA –

Leakage current – 0.8mA or less

Control

Output switch capacity 100mA or less 3 ~ 50mA

Residual voltage 2V or less (load current 100mA,Wire length 2m)

3V or less (load current 50mA,

Wire length 2m) 5V below (load current 50mA,

Wire length 2m)

Indicator action display (yellow LED) Action display (red

LED), set the action display (green LED)

Operation mode (near detection object) NO (normally open)

For details, refer to the timing diagram in the “Input

Output Section Circuit Diagram” in the Catalog

Protection circuit power reverse protection, surge

absorption

Load short circuit protection, output reverse protection

protection surge absorption, load short circuit protection

Ambient temperature range of work, save: the -25 ~ +70 ℃

(no icing, condensation)

Ambient temperature range of work, when stored: 35 ~ 95% RH

(no condensation)

Temperature of the impact of -25 ~ +70 ℃ temperature range

+23 ℃, the detection distance of ± 20%

The voltage is within ± 15% of the rated supply voltage

± 5% of the detection distance is within ± 1% of the

detection distance in the range of ± 15% of the rated power

supply voltage

Insulation resistance 50MΩ or more (DC500V megger) The

charging unit is integral with the housing

Withstand voltage AC1,000V 50 / 60Hz 1min charging part

between the whole and the shell

Vibration (durable) 10 ~ 55Hz up and down amplitude 1.5mm X

, Y, Z direction 2h

Impact (durable) 1,000m / s2 X, Y, Z direction 10 times

Protection structure IEC standard IP67, internal standard

oil (only sensor head)

Connection type Wire lead type (standard 2m) Connector relay

type (standard 0.3m)

After the quality (after packaging) about 65g about 95g

Material Sensory Head Part Housing Stainless Steel (SUS303)

Stainless Steel (SUS303) Fluorine Resin Coating

Detection surface

(Thickness) Stainless steel (SUS303) (0.2mm) Stainless steel

(SUS303) Fluororesin coating

(0.2mm)
Wire Polyester Elastomer (TPEE) (Shielded Wire) Viton

(Shielded Wire)
Relay Amplifier Housing ABS Resin Stainless Steel (SUS303)

Wire vinyl chloride (PVC) fluorine wire (flame retardant)

Accessories manual, amplifier mounting bracket

Note: After the power is turned on, it will take some time

to detect the distance will become stable.

In order to ensure sufficient detection distance, please

carefully confirm the use of the environment,

and set the distance below the use.