Germany mass flow meter
Germany mass flow meter is for low flow measurement
- Brand :Germany Krohne
- Model: mass flowmeter OPTIMASS 3000 for air water oil flow indicator
- Process temperature:-40 to +150°C
- Measuring tube material:Stainless Steel 316L
- Temperature:20°C / 68°F
- Protection Class: ip67
- Quality: New and original for mass flow meter.
- First choice for low flow applications
- Certified secondary pressure containment
- A common footprint for all three sizes, in Hastelloy ® or Stainless Steel
- Measuring system
- Measuring principle: Coriolis mass flow
- Application range: Mass flow and density measurement of fluids, gases
- Measured values: Mass, density, temperature
- Calculated values: Volume, referred density, concentration, velocity
- Mass
-
Liquid: ±0.1% of actual measured flow rate + zero stability
-
Gas: ±0.5% of actual measured flow rate + zero stability
-
Repeatability: Better than 0.05% plus zero stability (includes the combined effects of
repeatability, linearity and hysteresis) - Density
-
Accuracy: ±2 kg/m3 / ±0.13 lbs/ft3
- Measuring range: 400…3000 kg/m3 / 25…187 lbs/ft3
- On site calibration:±0.5 kg/m3 / ±0.033 lbs/ft3
- Temperature
- Accuracy:±1°C / ±1.8°F
The OPTIMASS 3000 is the cost effective solution for accurate measurement in a variety of applications, where there is a low process flow. Combined with the power of the MFC 400, the OPTIMASS 3000 will provide accurate measurement of mass, volume, density and concentration.
1. Highlights:
• Z-shaped measuring tube
• Easily drained and easy to clean
• Optional heating jacket
• Simple installation and start-up
• Modular electronics concept – electronics and sensor are easy to replace
• Data redundancy – accurate plug & play replacement of electronics
2. Industries:
• Wastewater
• Chemical
• Food & Beverage
• Paper & pulp
• Pharmaceutical
• Automotive
3. Applications:
• Fragrance dispensing and high precision coatings in the pharmaceutical industry
• CO2 injection and dosing in the food and beverage industry
• Natural gas and propane odorisation
• Engine test beds in the automotive industry