BROWSE PRODUCTS

HIGH-QUALITY PROCESS CONTROL SOLUTIONS

Home > Sensors > Keyence > Photoelectric Sensors > KEYENCE Photoelectric Sensors CZ seriesCZ-K1P Digital Fiber Optic Sensor
KEYENCE Photoelectric Sensors CZ seriesCZ-K1P Digital Fiber Optic Sensor

KEYENCE Photoelectric Sensors

KEYENCE Photoelectric Sensors CZ seriesCZ-K1P Digital Fiber Optic Sensor has industry’s highest color resolution. RGB digital amplifier has 12-bit resolution for all 3 colors. Built in self-stabilizer monitors each LED.

KEYENCE Photoelectric Sensors CZ seriesCZ-K1P Digital Fiber Optic Sensor

 

Model CZ-K1P
Output PNP
Light source Red LED, Green LED, Blue LED
Response time 300 μs/1 ms (switch-selectable)
Indicator lamp Output: Red LED, Calibration: Orange LED, External synchronization input: Green LED,
Matching rate/received light intensity: LCD (Red/Green)
Error indication Excess light intensity, insufficient light intensity, insufficient color difference
Calibration method 1-point/2-point calibration (switch-selectable)
Tolerance value adjustment Numerical value setting on digital display
Differentiation mode C mode/C + I mode/I mode (switch-selectable)
Timer function OFF-delay timer (40 ms)/Timer OFF (switch-selectable)
External synchronization input Response speed: 500 μs max.
External calibration input Input response time: 20 ms min.
Registered color selection 8-bank selection (By external input),
Non-voltage input, Input response time: 20 ms min.
Control output PNP: 40 VDC max. (100 mA max.), Residual voltage: 1.0 V max.
Protection circuit Reverse-polarity protection (power supply),
overcurrent protection (output), surge absorber (output)
Rating Power voltage 12 to 24 VDC ±10%, Ripple (P-P): 10% max.
Current consumption. 75 mA max.
Environmental resistance Operating ambientluminance Incandescent lamp: 5000 lux max., Sunlight: 10000 lux max.
Operating temperature range -10 to +55°C 14 to 131°F, No freezing*1
Operating ambient humidity 35 to 85% RH (No condensation)
Vibration 10 to 55 Hz, 1.5 mm 0.06″, double amplitude in X, Y, Z directions, 2 hours respectively
Shock resistance 500 m/s2 in X, Y, Z directions, 3 times respectively
Case material Polycarbonate
Weight Approx 115 g (including 2-m 6.6′ cable)