Home > Sensors > Keyence > Photoelectric Sensors > KEYENCE Self-contained CMOS Photoelectric Sensors LR-Z series
KEYENCE Self-contained CMOS Photoelectric Sensors LR-Z series

KEYENCE Photoelectric Sensors

KEYENCE Photoelectric Sensors has become a standard for both machine builders and product manufacturers. Function allows for stable detection of clear.

Model:KEYENCE Self-contained CMOS Photoelectric Sensors LR-Z series
Type:U.C.D. Function Distance based laser sensorlaser sensor

Model LR-ZB100C3P*1
Type Distance based laser sensor
Appearance Rectangular
Output PNP
Cable connection M8 connector, 3-pin
Detectable distance 35 to 100 mm 1.38″ to 3.94″ (650 to 0)*2
Standard detectable deviation 35 to 50 mm 1.38″ to 1.97″: 1.5 mm 0.06″
50 to 100 mm 1.97″ to 3.94″: 3 mm 0.12″
Display resolution 2 (0.2 mm 0.008″)
Spot size Approx. 2 × 1 mm 0.08″ × 0.04″ at 100 mm 3.94″
Response time 1.5 ms / 10 ms / 50 ms selectable
Light source Type Red laser (660 nm)
Laser class Class 1 laser product
(IEC60825-1, FDA (CDRH) Part1040.10*3)
Function Indicator 3-digit 7-segment display (red),
output indicator (yellow),
DATUM indicator (orange),
1 spot indicator (green)
Timer OFF/ON delay/OFF delay/One-shot
Specifications Power voltage 10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
Power consumption 450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
Control output PNP Open collector,
Applied voltage 30 VDC or less, Control current 100 mA or less,
Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
Protection circuit Protection against reverse power connection, output overcurrent, output surge, reverse output connection
Output operation Light-ON / Dark-ON selectable
Enclosure rating IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*4, Diversey*4
Ambient light Incandescent lamp: 4000 lux or less
Sunlight: 8000 lux or less*5
Ambient temperature -10 to +50°C 14 to 122°F (No freezing)
Storage temperature -25 to +75°C -13 to 167°F (No freezing)
Ambient humidity 35 to 85%RH (No condensation)
Shock resistance 1000 m/s2 in X, Y, Z axis directions respectively 6 times
Vibration resistance 10 to 55 Hz Double amplitude 1.5 mm 0.06″ in the X, Y, Z axis directions respectively, 2 hours
Insulation resistance 20 MΩ or more (500 VDC)
Withstand voltage 1000 VAC 50/60 Hz 1 min
Material Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating,
Packing/Connector ring: FKM
Accompanying items Instruction Manual,
Certification/Identification label (FDA)
Weight Approx. 55 g
*1 M8 connector (3-pin) type does not include the external input function.
*2 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds “-99”, “-FF” is displayed.
*3 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
*4 Have passed resistance tests with cleaning agents from multiple manufactures.
*5 When the response time is 10 ms