Rosemount 8712E Remote Mount Transmitter
Rosemount Remote Mount Transmitter
The rosemount 8712E Remote Mount Transmitter brings diagnostics to any HART/ 4-20 mA system that can change how magmeters are installed, maintained, and verified.
In addition,the Rosemount 8712 also features an easy-to-use 2 line by 20 character operator interface, with quick access to all diagnostic information, and instant access to basic configuration setup through dedicated keys.
Firstly, Rosemount 8700 series flanged flowtube sensors fabricate from stainless and carbon steel and welded to provide a hermetic seal that protects against moisture and other contaminants.
Rosemount magmeter systems use pulsed DC technology that provides continuous automatic zeroing to compensate for variations in the process environment. Therefore, process liquid must have a conductivity of 5 microsiemens/cm (5 micromhos/cm) or greater.
Rosemount 8700 series flowtubes are interchangeable with both the 8712D and 8732 flow transmitters. And system accuracy is maintained regardless of line size or optional features. So, each Rosemount 8705 flanged flowtube nameplate has a sixteen-digit calibration number that can be entered into a transmitter through the Local Operator interface or the HART Communicator – depending on model.
First, industry leading performance with standard reference accuracy of 0.25% of rate with an optional High Accuracy of
0.15% of rate
Secondly,Rosemount 8712 HART Transmitter – available with Device Diagnostics including Smart Meter Verification to
improve reliability and performance. Then, quick setup with easy-to-use local operator interface
Then, Rosemount 8712H/8707 High-Signal System – Pulsed DC solutions for the most demanding flow measurement
applications
Moreover, Rosemount 8705 Flanged sensor – Fully welded sensor for maximum protection
Materials of construction
- Housing
Low-copper aluminum, Type 4X and IEC 60529 IP66 - Paint
Polyurethane - Cover gasket
Silicone Rubber
Transmitter weight
Transmitter approximately 9 lbs. (4 kg). Add 1 lb (0.5 kg) for
local operator interface.