Yokogawa Flange Mounted Differential Pressure Transmitter
Yokogawa EJA210E -DM Flange Mounted Differential Pressure Transmitter
Release date: 2012
Features:combines the ruggedness and success of the work-horse EJA-A series with the performance of the thoroughbred EJX-A series
The high performance differential pressure transmitter EJA210E can be used to measure levels of densities of solidifying or precipitating liquids.
- For 4 to 20 mA HART / BRAIN
(Output signal code D and J) - Update Period :Differential pressure: 45 ms
Static pressure: 360 ms - Accuracy
Absolute Pressure
1 MPa or higher: ±0.5% of span
Less than 1 MPa: ±0.5%×(1 MPa/span) of span
Gauge Pressure Reference
Gauge pressure reference is 1013 hPa (1 atm)
Yokogawa Flange Mounted Differential Pressure Transmitter
Yokogawa EJA210E -DM Flange Mounted Differential Pressure Transmitter
The high performance flange mounted differential
pressure transmitter EJA210E can be used to measure levels of densities of solidifying or precipitating liquids.
Meanwhile, It also features quick response, remote setup and monitoring via BRAIN or HART communications and self-diagnostics.
□ NORMAL OPERATING CONDITION
Ambient Temperature Limits
−40 to 85°C (−40 to 185°F)
−30 to 80°C (−22 to 176°F) with LCD display
(Note: The ambient temperature limits must be within the
fill fluid operating temperature range, see table 1.)
Process Temperature Limits
High pressure side: See table 1.
Low pressure side: −40 to 120°C (−40 to 248°F)
Ambient Humidity Limits
0 to 100% RH
Working Pressure Limits
See table 1.
Supply Voltage “◊”
For 4 to 20 mA HART / BRAIN
(Output signal code D and J)
10.5 to 42 V DC for general use and flameproof type.
10.5 to 32 V DC for lightning protector
(option code /A.)
10.5 to 30 V DC for intrinsically safe, type n, or nonincendive.
Minimum voltage limited at 16.6 V DC for digital
communications, BRAIN and HART
For 1 to 5 V HART (Output signal code Q)
Power supply :
9 to 28 V DC for general use and flame proof type.
Power Consumption :
0.96 mA to 3 mA, 27 mW
