Electromagnetic Flowmeter

Electromagnetic Flowmeter Endress Hauser Proline Promag 53E offers highest accuracy in the most complex and demanding measuring tasks.

Brand :Endress Hauser
Model: Endress Hauser Electromagnetic Flowmeter Proline Promag 53E
Diameter：DN 15 to 600 (½ to 24″)
Measurement error：Volume flow: ±0.2 % o.r. ± 2 mm/s (0.08 in/s)
Range:4 dm³/min to 9600 m³/h (1 to 44 000 gal/min)
Pressure range: PN 40, Class 150, 20K
Process Temperature:–10 to +110 °C (+14 to +230 °F)
Output: 4 modular outputs:
0‐20 mA (active)/4‐20 mA (active/passive)
Pulse/frequency (passive)
Relay output
Switch output (passive)
Input:2 modular inputs:
Status input
0‐20 mA (aktiv)/4‐20 mA (aktiv/passiv)

Endress Hauser Electromagnetic Flowmeter Proline Promag 53E

Application
• The measuring principle is virtually independent of pressure, density, temperature and viscosity
• Fully suitable for basic applications in the chemical and process industry
Device properties
• Nominal diameter: max. DN 600 (24″)
• Ex approvals for Zone 2
• Liner made of PTFE
• 4-line backlit display with touch control
• Device in compact or remote version
• HART, PROFIBUS DP/PA, Modbus RS485, FF, EtherNet/IP

Your benefits
• Cost-effective sensor – ideal solution for basic requirements
• Energy-saving flow measurement – no pressure loss due to cross-section constriction
• Maintenance-free – no moving parts
• Quality – software for filling & dosing, density, electrode cleaning and also advanced diagnostics
• Easy calculation – bidirectional totalizers
• Automatic recovery of data for servicing

endress-hauser-electromagnetic-flowmeter-proline-promag-53e

Electromagnetic Flowmeter

Electromagnetic Flowmeter Endress Hauser Proline Promag 51W offers highly accurate measurement of liquids for a wide range of standard applications.

Brand :Endress Hauser
Model: Endress Hauser Electromagnetic Flowmeter Proline Promag 51W
Diameter：”DN 25…2000，1″…78″
Measurement error：± 0.5%，± 0.2%
Range:0…110’000 m3/h
Pressure range: PN6…40
Process Temperature:-20…+80℃(176℉)
Output: 4 … 20 mA pulse / frequency, state
Input:Status

Endress Hauser Electromagnetic Flowmeter Proline Promag 51W

Application
Electromagnetic flowmeter for custody transfer with cold water:
• Flow measurement up to 110,000 m3/h
• Fluid temperature (for a certified device) up to +30 °C
• Process pressures up to 40 bar
• Fitting lengths to DVGW/ISO
• PTB approval
• Metrological Classes A and B
• With national type examination for cold water (GER)
• Continous operation at Qmax possible
Application-specific lining materials:
• Polyurethane, hard rubber, PFA and PTFE
Approvals for hazardous area:
• ATEX
Lined measuring pipes with materials approved for drinking water:
• KTW, WRAS, ACS, etc.
Application-specific measurement output:
• With a certified totalizer display and pulse output

Your benefits
Promag measuring devices offer you cost-effective flow measurement with a high degree of accuracy for a wide range of process conditions.
The uniform Proline transmitter concept comprises:
• Modular device and operating concept resulting in a higher degree of efficiency
• Uniform operating concept
The tried-and-tested Promag sensors offer:
• No pressure loss
• Not sensitive to vibrations
• Simple installation and commissioning

endress-hauser-electromagnetic-flowmeter-proline-promag-51w

Electromagnetic Flowmeter

Electromagnetic Flowmeter Promag 51P Is dedicated for chemical and process applications with corrosive liquids and high medium temperatures.

Brand :Endress Hauser
Model: Endress Hauser Electromagnetic Flowmeter Proline Promag 51P
Diameter：”DN 15…600，1/2″…24″
Measurement error：± 0.5%，± 0.2%
Range:0…9’600 m3/h
Pressure range: PN10…40
Process Temperature:-40…+150℃
Output: 4 … 20 mA pulse / frequency, state
Input:Status

Endress Hauser Electromagnetic Flowmeter Proline Promag 51P

Application
Electromagnetic flowmeter for custody transfer with cold water:
• Flow measurement up to 110,000 m3/h
• Fluid temperature (for a certified device) up to +30 °C
• Process pressures up to 40 bar
• Fitting lengths to DVGW/ISO
• PTB approval
• Metrological Classes A and B
• With national type examination for cold water (GER)
• Continous operation at Qmax possible
Application-specific lining materials:
• Polyurethane, hard rubber, PFA and PTFE
Approvals for hazardous area:
• ATEX
Lined measuring pipes with materials approved for drinking water:
• KTW, WRAS, ACS, etc.
Application-specific measurement output:
• With a certified totalizer display and pulse output

Your benefits
Promag measuring devices offer you cost-effective flow measurement with a high degree of accuracy for a wide range of process conditions.
The uniform Proline transmitter concept comprises:
• Modular device and operating concept resulting in a higher degree of efficiency
• Uniform operating concept
The tried-and-tested Promag sensors offer:
• No pressure loss
• Not sensitive to vibrations
• Simple installation and commissioning

endress-hauser-electromagnetic-flowmeter-proline-promag-51p

Electromagnetic Flowmeter

Electromagnetic Flowmeter Endress Hauser Proline Promag 50W offers highly accurate measurement of liquids for a wide range of standard applications.

Brand :Endress Hauser
Model: Endress Hauser Electromagnetic Flowmeter Proline Promag 50W
Diameter：”DN 25…2000，1″…78″
Measurement error：± 0.5%，± 0.2%
Range:0…110’000 m3/h
Pressure range: PN6…40，Cl 150…300，JIS 10…20K，AWWA Class D，AS 2129
Process Temperature:-20…+80℃(176℉)
Output: 4 … 20 mA pulse / frequency, state
Input:Status

Endress Hauser Electromagnetic Flowmeter Proline Promag 50W

Application
Electromagnetic flowmeter for bidirectional measurement of liquids with a minimum
conductivity of 5 μS/cm:
• Drinking water
• Wastewater
• Sewage sludge
• Flow measurement up to 110000 m³/h
(484315 gal/min)
• Fluid temperature up to +80 °C (+176 °F)
• Process pressures up to 40 bar (580 psi)
• Lengths in accordance with DVGW/ISO
Application-specific lining of the measuring pipe from
polyurethane or hard rubber with the following drinking
water permissions:
• KTW
• WRAS
• NSF
• ACS
Approvals for hazardous area:
• ATEX
• IECEx
• FM
• CSA
• NEPSI
Connection to process control system:
• HART
• PROFIBUS DP/PA
• FOUNDATION Fieldbus
• MODBUS RS485

Your benefits
Promag measuring devices offer you cost-effective flow measurement with a high degree of accuracy for a wide range of process conditions.
The uniform Proline transmitter concept comprises:
• Modular device and operating concept resulting in a higher degree of efficiency
• Software options for batching, electrode cleaning and for measuring pulsating flow
• High degree of reliability and measuring stability
• Uniform operating concept
The tried-and-tested Promag sensors offer:
• No pressure loss
• Not sensitive to vibrations
• Simple installation and commissioning

endress-hauser-electromagnetic-flowmeter-proline-promag-50w

Electromagnetic Flowmeter

Electromagnetic Flowmeter Endress Hauser Proline Promag 50P offers highly accurate measurement of liquids for a wide range of applications.

• Brand :Endress Hauser
• Model: Endress Hauser Electromagnetic Flowmeter Proline Promag 50P
• Diameter：”DN 15…600，1/2″…24″
• Measurement error：± 0.5%，± 0.2%
• Range:0…9’600 m3/h
• Pressure range: PN10…40，Cl 150…300，JIS 10…20K，AS 2129
• Process Temperature:-40…+180℃
• Output: 4 … 20 mA pulse / frequency, state
• Input:Status

Endress Hauser Electromagnetic Flowmeter Proline Promag 50P

Electromagnetic flowmeter for bidirectional measurement of liquids with a minimum
conductivity of ≥ 5 μS/cm:
• Acid, alkalis
• Paints
• Pastes
• Water, wastewater etc.
• Flow measurement up to 9600 m³/h (42268 gal/min)
• Fluid temperature up to +180 °C (356 °F)
• Process pressures up to 40 bar (580 psi)
• Lengths in accordance with DVGW/ISO
Application-specific lining materials:
• PTFE
• PFA
Approvals for hazardous area:
• ATEX
• IECEx
• FM
• CSA
• NEPSI
• TIIS

Connection to process control system:
• HART
• PROFIBUS DP/PA
• FOUNDATION Fieldbus
• MODBUS RS485
Your benefits
Promag measuring devices offer you cost-effective flow measurement with a high degree of accuracy for a wide range of process conditions.
The uniform Proline transmitter concept comprises:
• Modular device and operating concept resulting in a
higher degree of efficiency
• Software options for batching, electrode cleaning and
for measuring pulsating flow
• High degree of reliability and measuring stability
• Uniform operating concept
The tried-and-tested Promag sensors offer:
• No pressure loss
• Not sensitive to vibrations
• Simple installation and commissioning

endress-hauser-electromagnetic-flowmeter-proline-promag-50p

Electromagnetic Flowmeter

Electromagnetic Flowmeter Endress Hauser Proline Promag 50L offers highly accurate measurement of liquids for a wide range of standard applications.

• Brand :Endress Hauser
• Model: Endress Hauser Electromagnetic Flowmeter Proline Promag 50L
• Diameter：Lap joint flange; lap joint flange, stamped plate: DN 25 to 300 (1 to 12″)
  Fixed flange: DN 350 to 2400 (14 to 90″)
• Measurement error：Volume flow (standard): ±0.5 % o.r. ± 1 mm/s (0.04 in/s)
  Volume flow (option): ±0.2 % o.r. ± 2 mm/s (0.08 in/s)
• Range:9 dm³/min to 162 000 m³/h (2.5 gal/min to 1030 Mgal/d)
• Pressure range: PN 16, Class 150
• Process Temperature:Liner material hard rubber: 0 to +80 °C (+32 to +176 °F)
  Liner material polyurethane: –20 to +50 °C (–4 to +122 °F)
  Liner material PTFE: –20 to +90 °C (–4 to +194 °F)
• Output: 3 outputs:
  0‐20 mA (active)/4‐20 mA (active/passive)
  Pulse/frequency output (passive)
  Switch output (passive)
• Input:Status input

Endress Hauser Electromagnetic Flowmeter Proline Promag 50LH

Application
• The measuring principle is virtually independent of pressure, density, temperature and viscosity
• Fully suitable for standard applications in the water and wastewater industry
Device properties
• Up to 30 % less sensor weight
• Nominal diameter: DN 25 to 2400 (1 to 90″)
• Maximum reduced installation length to DVGW/ISO
• 2-line backlit display with push buttons
• Device in compact or remote version
• HART, PROFIBUS PA/DP

Your benefits
• Reduced installation costs – flexible mounting by one-of-akind lap-joint flange concept (DN < 350/14″)
• Energy-saving flow measurement – no pressure loss due to cross-section constriction
• Maintenance-free – no moving parts
• Fast commissioning – application-specific Quick Setups
• Safe operation – display provides easy readable process information
• Fully industry compliant – IEC/EN/NAMUR

endress-hauser-electromagnetic-flowmeter-proline-promag-50l

Electromagnetic Flowmeter

Electromagnetic Flowmeter Endress Hauser Proline Promag 50H offers highly accurate measurement of liquids for a wide range of standard applications.

• Brand :Endress Hauser
• Model: Endress Hauser Electromagnetic Flowmeter Proline Promag 50H
• Diameter：”DN 2…100，1/12″…4″
• Measurement error：± 0.5%，± 0.2%
• Range:0…282 m3/h
• Pressure range: PN16…40
• Process Temperature: -20…+150℃
• Output: 4 … 20 mA pulse / frequency, state
• Input:status

Endress Hauser Electromagnetic Flowmeter Proline Promag 50H

Application
• The measuring principle is virtually independent of pressure, density, temperature and viscosity
• For the smallest flow quantities and demanding hygienic applications
Device properties
• Liner made of PFA
• Sensor housing made of stainless steel (3-A, EHEDG)
• Wetted materials CIP, SIP cleanable
• Device in compact or remote version Promag 53
• 4-line backlit display with touch control
• HART, PROFIBUS PA/DP, Modbus RS485, FF, EtherNet/IP

Your benefits
• Flexible installation concept – numerous hygienic process connections
• Energy-saving flow measurement – no pressure loss due to cross-section constriction
• Maintenance-free – no moving parts Promag 53
• Quality – software for filling & dosing, density, electrode cleaning and also advanced diagnostics
• Easy calculation – bidirectional totalizers
• Automatic recovery of data for servicing

endress-hauser-electromagnetic-flowmeter-proline-promag-50h

Electromagnetic Flowmeter

Electromagnetic Flowmeter Endress Hauser Proline Promag W800 is the specialized sensor for all applications in the water industry.

• Brand :Endress Hauser
• Model: Endress Hauser Electromagnetic Flowmeter Proline Promag W800
• Diameter：DN 25 to 300 (1 to 12″)
• Measurement error：Volume flow: ±0.5 % o.r. ± 2 mm/s (±0.5 % o.r. ± 0.08 in/s)
• Range:15 dm³/min to 2500 m³/h (4 to 11 000 gal/min)
• Pressure range: PN 40, Class 300, 20K
• Process Temperature: Liner material hard rubber: 0 to +80 °C (+32 to +176 °F)
  Liner material polyurethane: –20 to +50 °C (–4 to +122 °F)
• Output: Pulse/switch output (passive)
• Input:Status input

Endress Hauser Electromagnetic Flowmeter Proline Promag W800

Application
• The electromagnetic measuring principle is unaffected by pressure, temperature and flow profile
• Certified sensor for the most demanding water and wastewater applications
Device properties
• International drinking water approvals
• Degree of protection IP68 (Type 6P enclosure)
• Approved for custody transfer to MI-001/OIML R49
• Transmitter housing made of durable polycarbonate
• All in 1 housing incl. batteries & wireless modem
• Measuring intervals can be adapted individually

Your benefits
• For direct underground installation or permanent underwater use
• Secure, reliable long-term operation – robust and completely welded sensor
• Energy-saving flow measurement – no pressure loss due to cross-section constriction
• Maintenance-free – no moving parts
• No power grid required – battery lifetime of up to 15 years
• Worldwide transmission of measured data and events via email and SMS – integrated GSM/GPRS modem
• Reliable data storage – integrated SD card

endress-hauser-electromagnetic-flowmeter-proline-promag-w800

Electromagnetic Flowmeter

Electromagnetic Flowmeter Promag W400 saves time and costs thanks to the broad functionality of its water- and wastewater-optimized transmitter.

• Brand :Endress Hauser
• Model: Endress Hauser Proline Promag W400 Electromagnetic Flowmeter
• Diameter：DN 25 to 2000 (1 to 78″)
• Measurement error：Volume flow (standard): ±0.5 % o.r. ± 1 mm/s (0.04 in/s)
  Volume flow (option): ±0.2 % o.r. ± 2 mm/s (0.08 in/s), Flat Spec
• Range:9 dm³/min to 110 000 m³/h (2.5 gal/min to 700 Mgal/d)
• Pressure range: PN 40, Class 300, 20K
• Process Temperature: Liner material hard rubber: 0 to +80 °C (+32 to +176 °F)
  Liner material polyurethane: –20 to +50 °C (–4 to +122 °F)
• Output: 3 ouputs:
  0‐20 mA/4‐20 mA HART (active)
  Pulse/frequency/switch output (passive)
  Pulse/frequency output (passive)
  Switch output (passive)
• Input:Status input

Endress Hauser Proline Promag W400 Electromagnetic Flowmeter

Application
• The measuring principle is practically independent of pressure, density, temperature and viscosity
• The specialist for very demanding applications in the water and wastewater industry
Device properties
• International drinking water approvals
• Degree of protection IP68 (Type 6P enclosure)
• Approved for custody transfer to MI‐001/OIML R49
• Transmitter housing made of durable polycarbonate or aluminum
• Same housing concept for compact/remote version
• Integrated data logger for measured values monitoring

Your benefits
• For direct underground installation or permanent underwater use
• Safe, reliable long-term operation – robust and completely welded sensor
• Energy-saving flow measurement – no pressure loss due to cross-section constriction
• Maintenance-free – no moving parts
• Safe operation – no need to open device thanks to touch ncontrol display, backlighting
• Time‐saving local operation without additional software and hardware – integrated web server
• Integrated verification – Heartbeat Technology™

endress-hauser-proline-promag-w400-electromagnetic-flowmeter

Electromagnetic Flowmeter

Electromagnetic Flowmeter Promag P 200 is dedicated for chemical and process applications with corrosive liquids and high medium temperatures.

• Brand :Endress Hauser
• Model: Endress Hauser Proline Promag P 200 Electromagnetic Flowmeter
• Diameter：DN 15 to 200 (½ to 8″)
• Measurement error：Volume flow: ±0.5 % o.r. ± 2 mm/s (0.08 in/s)
• Range:4 dm3/min to 1100 m3/h (1 to 4850 gal/min)
• Pressure range: PN 40, Class 300, 20K
• Process Temperature: Liner material PFA: –20 to +150 °C (–4 to +302 °F)
  Liner material PTFE: –40 to +130 °C (–40 to +266 °F)
• Output: 4‐20 mA HART (passive)
  Pulse/frequency/switch output (passive)
• Input:None

Endress Hauser Proline Promag P 200 Electromagnetic Flowmeter

Application
• The measuring principle is virtually independent of pressure, density, temperature and viscosity
• Dedicated for chemical and process applications with corrosive liquids and high medium temperatures
Device properties
• Nominal diameter: max. DN 200 (8″)
• All common Ex approvals
• Liner made of PTFE or PFA
• Loop-powered technology
• Robust two-chamber housing
• Plant safety: worldwide approvals (SIL, Haz. area)

Your benefits
• Versatile applications – wide variety of wetted materials
• Energy-saving flow measurement – no pressure loss due to cross-section constriction
• Maintenance-free – no moving parts
• Convenient device wiring – separate connection compartment
• Safe operation – no need to open the device due to display with touch control, background lighting
• Integrated verification – Heartbeat Technology™

endress-hauser-proline-promag-p-200-electromagnetic-flowmeter

Electromagnetic Flowmeter

Electromagnetic Flowmeter Promag P 100 is dedicated for chemical and process applications with corrosive liquids and high medium temperatures.

• Brand :Endress Hauser
• Model: Endress Hauser Proline Promag P 100 Electromagnetic Flowmeter
• Diameter：DN 15 to 600 (½ to 24″)
• Measurement error：Volume flow (standard): ±0.5 % o.r.± 1 mm/s (0.04 in/s)
  Volume flow (option): ±0.2 % o.r. ± 2 mm/s (0.08 in/s)
• Range:4 dm³/min to 9600 m³/h (1 to 44 000 gal/min)
• Pressure range: PN 40, Class 300, 20K
• Process Temperature: Liner material PFA: –20 to +150 °C (–4 to +302 °F)
  Liner material PFA high‐temperature: –20 to +180 °C (–4 to +356 °F)
  Liner material PTFE: –40 to +130 °C (–40 to +266 °F)
• Output: 4‐20 mA HART (active)
  Pulse/frequency/switch output (passive)
• Input:None

Endress Hauser Proline Promag P 100 Electromagnetic Flowmeter

Application
• The measuring principle is virtually independent of pressure, density, temperature and viscosity
• Dedicated for chemical and process applications with corrosive liquids and high medium temperatures
Device properties
• Nominal diameter: max. DN 600 (24″)
• All common Ex approvals
• Liner made of PTFE or PFA
• Robust, ultra-compact transmitter housing
• Local display available

Your benefits
• Versatile applications – wide variety of wetted materials
• Energy-saving flow measurement – no pressure loss due to cross-section constriction
• Maintenance-free – no moving parts
• Space‐saving transmitter – full functionality on smallest footprint
• Time‐saving local operation without additional software and hardware – integrated web server
• Integrated verification – Heartbeat Technology™

endress-hauser-proline-promag-p-100-electromagnetic-flowmeter

• Brand :Endress Hauser
• Model:Endress Hauser Proline Promag L400 Electromagnetic Flowmeter
• Diameter：Lap joint flange, lap joint flange, stamped plate: DN 25 to 300 (1 to 12″)
  Fixed flange: DN 350 to 2400 (14 to 90″)
• Measurement error：Volume flow (standard): ±0.5 % o.r. ± 1 mm/s (0.04 in/s)
  Volume flow (option): ±0.2 % o.r. ± 2 mm/s (0.08 in/s)
• Range:9 dm³/min to 162 000 m³/h (2.5 gal/min to 1030 Mgal/d)
• Pressure range: PN 16, Class 150
• Process Temperature: Liner material hard rubber: 0 to +80 °C (+32 to +176 °F)
  Liner material polyurethane: –20 to +50 °C (–4 to +122 °F)
  Liner material PTFE: –20 to +90 °C (–4 to +194 °F)F)
• Output: 3 ouputs:
  0‐20 mA/4‐20 mA HART (active)
  Pulse/frequency/switch output (passive)
  Pulse/frequency output (passive)
  Switch output (passive)
• Input:Status input

Endress Hauser Proline Promag L400 Electromagnetic Flowmeter

Application
• The measuring principle is practically independent of pressure, density, temperature and viscosity
• Perfectly suitable for standard applications in the water and wastewater industry
Device properties
• Up to 30 % less sensor weight
• Nominal diameter: DN 25 to 2400 (1 to 90″)
• Maximum reduced installation length to DVGW/ISO
• Transmitter housing made of durable polycarbonate or aluminum
• Same housing concept for compact/remote version
• Integrated data logger for measured values monitoring

Your benefits
• Reduced installation costs – flexible mounting by one‐of‐akind lap‐joint flange concept (DN < 350/14″)
• Energy-saving flow measurement – no pressure loss due to cross-section constriction
• Maintenance-free – no moving parts
• Safe operation – no need to open the device due to display with touch control, background lighting
• Time‐saving local operation without additional software and hardware – integrated web server
• Integrated verification – Heartbeat Technology™

endress-hauser-proline-promag-l400-electromagnetic-flowmeter